PRODUCTS CENTER

sae 100 r1at 1 4 wp 225 oil s

TYPE APPROVAL CERTIFIE - ALFAGOMMA

1.1 Ratings Hose type Flexor 1SN/R1AT ISO 1436-1 - SAE 100 R1AT - EN 853 1SN - 122 Diameter (mm) 5 6 8 10 12.5 16 19 25 32 38 51 Maximum working pressure (bar) 250 225 215 180 160 130 105 88 63 50 40 Temperature range -40 C to +100 C

SAE 100R1 AT / DIN20022 EN 853 1SN-Hydraulic hose--Hebei Orient Rubber & Plastic Co., Ltd. - Industrial hose hydraulic hose oil …

SAE 100 R1 steel wire reinforced hydraulic hose is suitable for hydraulic hose and usual industrial systems. It can bear higher working pressure than other rubber hoses thanks to its high tensile braided steel wire reinforcement. It is composed of three parts: tube, reinforcement and cover. The tube is made from oil resistant synthetic rubber

DS1-T Railway - Diesse Rubber

1/4" 12,8 0.50 225 3250 900 13000 100 4.00 0,21 0.14 1SN-08-05-RAIL 08-5 7,9 5/16" 14,4 0.57 215 3100 860 12400 115 4.50 0,26 0.18 1SN-10-06-RAIL 10-6 …

EN 853 1SN hydraulic hose,EN853 1SN hydraulic hose

Applicable Specs: EN 853 1SN - SAE 100 R1AT - ISO 1436-1 1SN/R1AT. 2. KEY PERFORMANCE OF HYDRAULIC RUBBER HOSE. EN/DIN And New Sae Rated Working Pressures. Appearance: Wrap ( ID Less Than 25.4mm Smooth Cover) Branding: Printing And Indelible Branding With Eossed Technology. Colour: Black, Red, Blue, Yellow, Green, Gray.

SAE 100R1AT Hydraulic Hose

SAE 100R1AT Hydraulic Hose, One Wire Braid Hydraulic Hose. Up to 2,750 PSI Max in 1/4 size. 4:1 safety rating on all R1 hoses Inner tube: Oil-resistant synthetic rubber Recommended for hydraulic system service with petroleum and water-base fluids, or general

HYDRAULIC HOSES

EN 853 2ST - SAE 100 R2A OIL RETURN LINE 605AA 43 FLEXOR 4 SAE 100 R4 24/11/2004 1.33.21 4 Pag. HYDRAULIC HOSES ALFAJET - PRESSURE WASH 8I8AA 44 ALFAJET 120 - BLACK COVER ALFAGOMMA PROPRIETARY HOSE 8B3AA 45 46

SAE 100R1AT Specs | Hose and Fittings Source

1 High Tensile Steel Wire Braid. Black, Oil, Weather and Abrasion Resistant Synthetic Rubber. MSHA Approved. Safety Factor: 4:1. Temperature Range: -40°F to 212°F (-40°C to 100°C) Intermittent Service 248°F (120°C) Maximum Temperature Recommended for Water Base Hydraulic Fluid 158°F (70°C) Maximum Temperature Recommended for Air 140°F

EN 853 1SN hydraulic hose,EN853 1SN hydraulic hose

Applicable Specs: EN 853 1SN - SAE 100 R1AT - ISO 1436-1 1SN/R1AT. 2. KEY PERFORMANCE OF HYDRAULIC RUBBER HOSE. EN/DIN And New Sae Rated Working Pressures. Appearance: Wrap ( ID Less Than 25.4mm Smooth Cover) Branding: Printing And Indelible Branding With Eossed Technology. Colour: Black, Red, Blue, Yellow, Green, Gray.

EN853 2SN / SAE 100 R2AT / DIN20022 2SN - Hose World

25 1 36.8 2390 162 300 1.320 100 SAE100R2AT-16 32 1 1/4 47 1810 125 419 1.965 40 SAE100R2AT-20 38 1 1/2 53.4 1300 90 500 2.265 40 SAE100R2AT-24 51 2 67.3 1160 80 630 3.05 40 SAE100R2AT-32 APPLIION: SEED OILS

SAE 100 R1AT / EN 853 1SN

Branding : Red transfer tape with white text `SUNFLEX SAE 100 R1AT / EN 853 1 SN'' O.D. inch mm mm psi bar psi bar inch mm m/kg R1T-04 -4 1/4 6.4 13.4 3265 225 13060 900 3.9 100 0.225 R1T-05 -5 5/16 7.9 15.0 3120 215 12480 850 4.5 105 0.260

Hydraulic Hose: DIN 20022 1SN/EN 853 1SN, DIN 20022 …

1/4" 6.4 6.2 7.0 10.6 11.6 13.0 12.7 14 450 6500 225 3250 900 13000 100 5/16" 7.9 7.7 8.5 12.1 13.3 14.7 14.3 16 430 6200 215 3100 860 12400 115 3/8" 9.5 9.3 10.1 14.5 15.7 17.0 16.7 18 360 5200 180 2600 720 10400 130 1/2" 12.7 12.3 13.5 17.5 19.1 20.1

EN 853 1SN / SAE 100 R1AT / DIN20022 1SN - Hose World

6 1/4 13.2 3260 225 100 0.235 100 SAE100R1AT-4 8 5/16 14.8 3110 215 114 0.270 100 SAE100R1AT-5 10 3/8 17.1 2610 180 127 0.340 100 SAE100R1AT-6 13 1/2 20.1 2320 160 178 0.410 100 SAE100R1AT-8 16 5/8 23.3 1880 130 200 0.510 100

Balflex DIN EN 853 1SN / SAE 100R1AT

Balflex ® DIN EN 853 1SN / SAE 100R1AT Balflex® DIN EN 853 1SN / SAE 100R1AT – 10.1002. According to ISO 1436 / DIN EN 853 type 1SN / SAE J517 type SAE 100R1 AT High pressure, single steel braid reinforced hydraulic hose Inner tube :

SAE 100R1AT Specs | Hose and Fittings Source

1 High Tensile Steel Wire Braid. Black, Oil, Weather and Abrasion Resistant Synthetic Rubber. MSHA Approved. Safety Factor: 4:1. Temperature Range: -40°F to 212°F (-40°C to 100°C) Intermittent Service 248°F (120°C) Maximum Temperature Recommended for Water Base Hydraulic Fluid 158°F (70°C) Maximum Temperature Recommended for Air 140°F

SAE 100R1AT Specs | Hose and Fittings Source

1 High Tensile Steel Wire Braid. Black, Oil, Weather and Abrasion Resistant Synthetic Rubber. MSHA Approved. Safety Factor: 4:1. Temperature Range: -40°F to 212°F (-40°C to 100°C) Intermittent Service 248°F (120°C) Maximum Temperature Recommended for Water Base Hydraulic Fluid 158°F (70°C) Maximum Temperature Recommended for Air 140°F

SAE100R1AT /EN853 1SN Descriptions - sophson

4SH-32 31.5 1 1/4 47.1 32.5 4714 130 18855 455 2.55 4SH-38 38.0 1 1/2 55.1 29.0 4206 116 16824 560 3.26 4SH-51 51.0 2 69.7 25.0 3626 100 14504 710 4.92 SAE 100 R12 Descriptions: Tube:€ synthetic rubber Reinforcement:€ Four spiraled of high tensile

TABLE OF CONTENT

TABLE OF CONTENT 1. HYDRAULIC HOSES –GENERAL INFORMATION 42. HYDRAULIC HOSE TYPE 2.1. ONE WIRE BRAID HYDRAULIC HOSES •DIN EN 853 1SN / SAE 100 R1AT 9 •DIN EN 857 1SC 10 •SAE 100 R17 11 2.2. TWO WIRE BRAID

HYDRAULIC HOSES - Intertraco

FlexIt 1t EN 853 1SN - SAE 100 R1AT One wire braid hose 6 FlexIt 2t EN 853 2SN - SAE 100 R2AT Two wire braid hose 7 1Sn-04 6 1/4” 04 11,1 0,437 13,2 0,520 225 3250 900 13000 100 3,94 0,21 0,14 1Sn-05 8 5/16” 05 12,7 0,500 14,5 0,571 215 3100

Hypress EN 853 1SN R1AT Hydraulic Hose

Part nuer ID Size OD Max WP Min BP Min BR Weight (approx) in mm mm bar psi bar psi mm inch kg/m ib/ft TFD0011-03 3/16" 4.8 03 11.8 250 3625 1000 14500 90 3.543 0.186 0.125 TFD0011-04 1/4" 6.4 04 13.4 225 3263 900 13050 100 3.937 0.226 0.152

DS1-T - Diesse Rubber

1/4" 12,8 0.50 225 3250 900 13000 100 4.00 0,21 0.14 1SN-08-05 08-5 7,9 5/16" 14,4 0.57 215 3100 860 12400 115 4.50 0,26 0.18 1SN-10-06 10-6 9,5 3/8" 16,9 0.67 180 2600 720 10400 125 4.92 0,32 0.22 1SN-12-08 12-8

SAE 100R1 AT / DIN20022 EN 853 1SN-Hydraulic hose--Hebei Orient Rubber & Plastic Co., Ltd. - Industrial hose hydraulic hose oil …

SAE 100 R1 steel wire reinforced hydraulic hose is suitable for hydraulic hose and usual industrial systems. It can bear higher working pressure than other rubber hoses thanks to its high tensile braided steel wire reinforcement. It is composed of three parts: tube, reinforcement and cover. The tube is made from oil resistant synthetic rubber

SAE 100 R2AT | Pacific Hoseflex - Hydraulic Rubber Hose

SAE 100 R2AT Part No.: IH-R2AT Colour: Black Tube: Synthetic oil resistant rubber. Cover: Synthetic rubber – abrasion, ozone and weather resistant. Reinforcement: 2 high-tensile steel wire braids. Size Available: 1/4’’ – 4’’ Temperature:-40 C +120 C SAE 100

SAE 100R1 AT / DIN20022 EN 853 1SN-Hydraulic hose--Hebei Orient Rubber & Plastic Co., Ltd. - Industrial hose hydraulic hose oil …

SAE 100 R1 steel wire reinforced hydraulic hose is suitable for hydraulic hose and usual industrial systems. It can bear higher working pressure than other rubber hoses thanks to its high tensile braided steel wire reinforcement. It is composed of three parts: tube, reinforcement and cover. The tube is made from oil resistant synthetic rubber

SAE 100R1 Wire Braided Medium Pressure Hose with Two Options

SAE 100R1 medium pressure hydraulic hose has high tensile braid wire reinforcement. High abrasion and high temp types are supplied. SAE 100R1 high tensile steel wire braided medium pressure hose SAE 100R1AT single steel wire braided hose is a typical medium pressure hydraulic hose and strongly recommended for hydraulic lines or general industrial system.

Utilize sae 100 r2at For Car Efficiency and help improve the car''s performance. The quality sae 100 r2at ensure that cars remain in tip-top condition. Ad Guaranteed Quality Industry High Pressure R2AT Hydraulic Hose Features of SAE 100 R2AT - EN 853 2SN 1

length testing of pvc steel wire reinforced hose - INDUSTRIAL PVC HOSE - SUNHOSE

SAE 100 R1AT/1SN SAE 100 R2AT/2SN DIN EN 857 1SC DIN EN 857 2SC SAE 100 R16 SAE 100 R17 Steel Wire Spiral Hose DIN EN 856 4SH DIN EN 856 4SP SAE 100 R9 SAE 100 R12 SAE 100 R13 SAE 100 R15 Rubber Hoses Rubber Water/Air Hose

DS1-T - Diesse Rubber

1/4" 12,8 0.50 225 3250 900 13000 100 4.00 0,21 0.14 1SN-08-05 08-5 7,9 5/16" 14,4 0.57 215 3100 860 12400 115 4.50 0,26 0.18 1SN-10-06 10-6 9,5 3/8" 16,9 0.67 180 2600 720 10400 125 4.92 0,32 0.22 1SN-12-08 12-8

FLEXOR 1SN – R1AT hose for fuel oil, antifreeze solutions - …

Cover hose: black synthetic rubber, abrasion, ozone and hydrocarbon resistant. Reinforcement: one high tensile steel braid (1B). Temperature range: -40°C to +100°C. Appliions: high pressure hydraulic lines, fuel oil, antifreeze solutions, air and water. HALOGEN-FREE compound. Standard: ISO 1436-1 - SAE 100 R1AT/R1S EN 853 1SN.

HYDRAULIC HOSES - Intertraco

FlexIt 1t EN 853 1SN - SAE 100 R1AT One wire braid hose 6 FlexIt 2t EN 853 2SN - SAE 100 R2AT Two wire braid hose 7 1Sn-04 6 1/4” 04 11,1 0,437 13,2 0,520 225 3250 900 13000 100 3,94 0,21 0,14 1Sn-05 8 5/16” 05 12,7 0,500 14,5 0,571 215 3100

RUBBER, COMPOSITE HOSE & DUCTING - Pacific Hoseflex Pacific …

IH-R1AT-04 1/4 ’’ 6.4 13.4 225 22500 900 90000 100 IH-R1AT-05 5/16’’ 7.9 50 215 21500 850 85000 105 IH-R1AT-06 3/8 Synthetic oil resistant rubber. Cover: Synthetic rubber - abrasion, ozone and weather resistant. Reinforcement: 1 high tensile steel wire ’’